OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 145 / 323

Page: 91
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.35 Motor Assembly
1. Power OFF the printer.
2. Remove the cut sheet feeder.
3. Disengage the rear-bin unit from the front-bin unit (3.2.30 ).
4. Remove the left and right side covers from the front bin unit (3.2.31 ).
5. Remove the control board
(3.2.33 ).
6. Remove the four screws (1).
7. Remove the right sheet guide assembly (2).
8. Pull out the connection cord (4) from the groove (A) in the side frame (3).
9. Unbend the three cable clamps (5) to release the connection cord (4).
10. Remove the two screws (6).
11. Remove the motor assembly (7).
12. Remove the idle gear (8).
NOTE:
Installation
Use a new tie wrap when installing the connection cord.