OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 143 / 323

Page: 90
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.34 Connection Cord
1. Power OFF the printer.
2. Remove the cut sheet feeder.
3. Disengage the rear-bin unit from the front-bin unit (3.2.30 ).
4. Remove the left side cover from the front bin unit (3.2.31 ).
5. Disconnect connector CN1 (2) from the control board (1).
6. Remove the three screws (3).
7. Remove the control board (1).
8. Cut the tie wrap (4).
9. Remove the connection cord (6) from the post (5).
NOTE:
Installation
Use a new tie wrap when installing the connection cord.