![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925046.webp)
Page: 35
Service Guide ML393/ML393CPlus
Chapter 2 Principles of Operation
2.1.03 Initialization
The printer is initialized whenever the power is turned ON or when the I-PRIME signal is received at the
parallel interface. Initialization is started when the RST-P signal is sent from the reset circuit to the MPUs
and LSIs.
When RST-P is generated, ROM program execution starts with the mode setting of Q8, Q9, Q12 and Q13.
Next, ROM and RAM are checked for errors, RAM is initialized and the carriage, bail and ribbon (color
model only) are homed. The program finally establishes the interface signals (output level of ACK, BUSY,
etc.), then turns the SELECT lamp ON to inform the host computer that the printer is ready to receive
data.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...