![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925050.webp)
Page: 38
Service Guide ML393/ML393CPlus
Chapter 2 Principles of Operation
2.1.06 Spacing Drive Circuit
The Motor Control LSI (Q9) outputs the SPMO DA signal upon receiving the spacing command from the
Slave MPU (Q11). This is a fixed cycle pulse signal.
To control the motor speed, the Motor Control LSI varies the pulse duty cycle according to the speed data
from the Slave MPU.
The SPMO FOW or SPMO REV signal from the Head Control LSI (Q8) changes the current direction in
the DC motor to run the motor in either the forward or reverse direction.
As the space motor rotates, it generates feedback pulse signals SP Phase A and SP Phase B. The Motor
Control LSI detects the edge pulses from these signals and divides the frequency to output the MO LSI
IPT signal for use in Dot Timing.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...