OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 194 / 323

In cold, dry weather, static charges can build up on continuous-form paper. This can make the paper cling
to the paper separator. If this problem occurs during high-volume printing jobs, try moving the single sheet
paper guides on the separator together so that the paper rests on the guides rather than on the separator
itself.
8. Files do not print the way the printer menu and front panel are set.
Before sending a file to a printer, many word processors send an initialization string. This string contains
codes that reset the printer to a default set of features. Otherwise, the printer might print using features set
for a previous job. The codes will override panel or menu settings.
Check the word processors manual to see if the initialization string can be modified. If so, remove any
codes that interfere with the printers settings.
To set the printer to ignore the reset code, follow this procedure.
1. Verify that the printer is loaded with paper.
2. Press SELECT until the SELECT lamp goes out.
3. Press QUIET to enter Menu Mode.
4. The first Group/Item/Setting will print.
5. Press GROUP until GENERAL CONTROL prints.
6. Press ITEM until RESET INHIBIT prints.
7. Press SET until VALID prints.
8. Press EXIT save the settings and to exit the Menu Mode.
This will stop the reset code from resetting the printer, but other codes in the initialization string may still
override the printer Menu and / or front panel settings.
9. FONT, PRINT QUALITY, and CHARACTER PITCH (on the operator panel) do not work.
The Operator Panel Function Item in the Printer Menu can be set to enable (FULL OPERATION) or
disable (LIMITED OPERATION) these features. If the printer is part of a customized system or if it is used
by different operators, a system manager may be using this feature to maintain proper print settings.
To activate these switches, power OFF the printer. Press and hold QUIET while powering ON the printer.
Follow the normal menu procedures to set the Operator Panel Functions Item to FULL OPERATION.
10. Output is missing dots.
Check the headgap setting. Move the head gap lever to a lower setting.
Setting Paper Type
1 12 - 15 lb. paper
2 20 - 24 lb. paper
3 - 4 Labels
3 - 4 Two-part forms
4 - 5 Three-part forms