NTT docomo FOMA SO905i 07.11, Руководство пользователя

Страница: 44 / 470

42
Bef
ore Using the Handset
Powering On/Off
<Power on/off>

When you power on the FOMA terminal, the screen informing to execute the software update automatically may
appear (P.402).
1
Press (PWR) for over two seconds.
The FOMA terminal is powered on, the display and the keypad lights
are turned on, and an animation is displayed. After a while, the stand-by
display appears.

If you have set the PIN1 code setting to [ON], the PIN1 code input screen
appears. Enter the PIN1 code and press (OK) (P.123).
To power off
Press (PWR) for over two seconds.
●
If you replace the UIM with another one (except when the Omakase Lock is set), you need to enter a 4- to
8-digit Security code when the FOMA terminal is powered on. When the entered code is correct, the stand-by
display appears. If you enter a wrong Security code five times consecutively, the FOMA terminal is powered
off. (You can still power on the FOMA terminal, however.)
Setting the Basic Functions
<Initial setting>
The Initial setting can be used to make basic settings such as the Date/time and Security
code. See the respective pages for details about the settings.
■ Available setting items
Item Description
Date/time Set the date and time of the FOMA terminal (P.43).
Change code Change the Security code (P.124).
Keypad sound Set the volume of the tone to sound when you press the key (P.104).
Location request Set whether to provide positioning information (P.234).
All font size
setting Set the size of fonts to be used for displaying the Phonebook, Call record, Mail, i-mode
sites, and Input text display (P.119).
1
From the Menu, select [Settings] → [Management] → [Initial setting] and press .
Ｄａｔｅ／ｔｉｍｅ
Ｃｈａｎｇｅ ｃｏｄｅ Ｙｅｔ
Ｋｅｙｐａｄ ｓｏｕｎｄ １
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｙｅｔ
Ａｌｌ ｆｏｎｔ ｓｉｚｅ ｓｅｔｔｉｎｇ
Ｙｅｔ
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
2
Set each item.
● If you perform the Reset all data&set or do not change the Security code of the FOMA terminal or settings
of the Location request or All font size setting, the message “Initial setting is incomplete. Execute?” appears
when you power on the FOMA terminal. When you select [Yes], the display in step 1 appears and you can
perform the initial setting.