NTT docomo FOMA SO905i 07.11, Руководство пользователя, Страница: 324 / 470

322
Other Con
v
enient Functions
● W h e n t h e A l a r m a n d S c h e d u l e a l a r m a r e s e t
simultaneously, “ ” is displayed instead of “ ”.
● If the Alarm, Schedule alarm, and Booking alarm are set to
start at the same time, the following priority is applied.
1. Schedule alarm
2. Booking alarm
3. Alarm
● When you set an i-motion or Chaku-Uta Full ® for the alarm
tone or set an i-motion for the alarm image, the settings
may be changed in some cases.
At the Alarm Time
The alarm tone sounds for about one minute with the
indicator flashing.
Ａｌａｒｍ
０６：３０
To stop the alarm tone
Press any key.
When you do not stop the alarm
tone
The display informing the release
of the alarm appears. To turn off
the display, press
or .
To stop the Snooze
Press .
● If you set an i-motion with video and sound tracks to the
alarm tone, a movie in the i-motion is displayed.
● If the alarm time comes during a voice call or PushTalk
communication, the default alarm tone sounds and the
default alarm image is displayed. The vibrator does not
operate.
● The Alarm does not operate in the following cases.
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
●
If the alarm time comes in the following cases, the Alarm
may operate when the status changes to during a call or
stand-by.
- While placing/receiving a voice/videophone call or
originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the infrared
remote control is being used
- During the iC communication
- During data communication or while reading/writing
data from/into a microSD memory card on a PC with the
FOMA terminal connected using the USB cable
- While recording a still image/movie
- While the Schedule alarm/Booking alarm is sounding
- Beep while receiving Area Mail, while sounding Area
Mail ring tone, or displaying Area Mail
● If another function is executed during the Alarm or Snooze
operation, the alarm is stopped. The Snooze keeps
operating within five times.
●
When the PIN1 code setting and the Auto power on for the
Alarm are set to [ON], the FOMA terminal is automatically
powered on at the alarm time and the PIN1 code input
screen appears after the Alarm operation. If you set any
data for which the UIM operation restriction function is set
to the alarm tone, the default melody sounds.
● If you leave the FOMA terminal with the battery pack
removed or fully expended for a long period of time, the
date and time is reset, and the Alarm may not operate
correctly.