NTT docomo FOMA SO905i 07.11, Руководство пользователя, Страница: 332 / 470

330
Other Con
v
enient Functions
When the Call Charge Exceeds the Limit
Ｅｘｃｅｅｄ ｃｏｓｔ ｌｉｍｉｔ
W h e n t h e u p p e r l i m i t v a l u e o f
the call charge you have set is
exceeded during a call or data
communication, the notification icon
“
” (Exceed cost limit) appears in
the stand-by display.
W h e n y o u s e t t h e n o t i f i c a t i o n
method to [Alarm+Stand-by], an
alarm tone sounds when the stand-
by display reappears.
To check the call charge
Press (Link) in the stand-by
display and select “ ”.
● The alarm for the Call cost limit is heard at the same
volume level as set for the incoming call ring volume. It is
heard at the volume level 2 when you set the volume of the
ring tone to [3] or higher level, [STEP DOWN], or [STEP
UP].
Canceling the Icon for Limit Alert
Turn off the notification icon “ ”.
1
From the Menu, select [Settings] → [Management]
→ [NW Services] → [Call Cost/Duration] → [Delete
max cost icon] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
The screen for confirming whether to delete the maximum
cost icon appears.
3
Select [Yes] and press .
“ ” disappears.
Using the Calculator
<Calculator>
You can use the FOMA terminal to perform the four
basic operations of arithmetic (
＋ , − , × , ÷ ) for up to
nine digits.
Example: Calculating 64 × 5
1
From the Menu, select [LifeKit] → [Calculator] and
press .
０
2
Enter numbers and operators to display the result.
Press , , , , and in this order.
0 to 9
to
Add (+)
Subtract (−)
Multiply ( × )
Divide (÷)
Decimal (.)
Calculate (=)
or
Clear (C)/Clear All (AC)
● If the number is indivisible or the result of the calculation
contains a decimal point and proves to be 10 digits
or more, 10th digit and any more digits than this are
discarded for display from the rightmost digit.
● If the result of the calculation is 10 digits or more, or if you
attempt an illegal calculation (e.g. division by 0), the error
code “0E” appears.
● Minus numbers can be calculated only when you enter a
minus number first.
Using a Memo
<Text Memo>
Necessary information can be saved in the Text Memo.
Up to 10 text memos can be saved.
 When you enter [Contents] of a memo, (Complete)
appears and you can save the memo.
1
From the Menu, select [LifeKit] → [Text Memo],
press , and press (Create).
Ｅｄｉｔ Ｔｅｘｔ Ｍｅｍｏ
Ｃｏｎｔｅｎｔｓ
Ｃａｔｅｇｏｒｙ
Ｎｏｎｅ
2
Enter a memo at [Contents].
Enter a memo within 256 full-width or 512 half-width
characters.
3
Select a category icon at [Category].
4
Press (Complete).
The memo is saved.