NTT docomo FOMA SO905i 07.11, Руководство пользователя

Страница: 235 / 470

233
GPS Function
Providing Your Current Location Information
upon Request
<Location provision>
You can provide your current location information when
there is a request from another party.

Before using the Location provision, set the Location request
to [ON] or [Permission sched]. The default setting is set to
[OFF]. You may also need to perform the usage settings for
each service (P.234). (When you use “imadoco-search”, you
need to set “
位置情報利用設定
” (Settings to use location
information) (settings for imadoco-search) in i Menu (“ オプ
ション設定 ” (Options) of “ 料金＆お申込・設定 ” (Charge &
Subscription/Settings)).)

To use the Location provision, you may need to subscribe to
a service provider that supports this function. There may be a
charge for the use of the service.

To use the Location provision, follow the information provided
by the service provider and DoCoMo’s website.
 When the Location request is set to [ON] or [Permission
sched], the location information may be sent to a searcher
without operating the FOMA terminal.
When Your Location Information Is
Requested
When the provision of the location information is
requested by the preset GPS host, the Location
provision is started.
 During a voice call or PushTalk communication, the vibrator
does not operate.
When the settings for using each service is set to “ 許可 ” (accept)
イマドコサーチ
０９０ＸＸＸＸＸＸＸＸ
ドコモ一郎
Ｐｒｏｖｉｄｉｎｇ ｌｏｃａｔｉｏｎ
Ａｃｃｕｒａｃｙ： ★ ☆ ☆
“ ” flashes, the Loc. provide/accept
tone sounds, and the incoming
indicator flashes.
To quit the Location provision
Press (Cancel).
Continued
When the settings for using each service is set to “ 毎回確認 ”
(Check every time)
イマドコサーチ
０９０ＸＸＸＸＸＸＸＸ
ドコモ一郎
Ｐｒｏｖｉｄｉｎｇ ｌｏｃａｔｉｏｎ
Ａｃｃｕｒａｃｙ： ★ ☆ ☆
Ｌｏｃ．Ｒｅｑ．ｆｒｏｍ:
イマドコサーチ
ドコモ一郎
Ｓｅｎｄ Ｌｏｃ．
Ｎｏｔ Ｓｅｎｄ Ｌｏｃ．
Select [Send Loc.].
“ ” flashes, the Loc. provide/check
tone sounds, and the incoming
indicator flashes.
To quit the Location provision
Press (Cancel).
● If there is a request for your location information when
the Public mode (Drive mode) is set, the FOMA terminal
operates as follows.
- When the settings for using each service is set to “
許
可 ” (accept), it is indicated only in the display and the
location information is provided. The Loc. provide/accept
tone, vibrator, and incoming indicator do not operate.
- When the settings for using each service is set to “ 毎回
確認 ” (Check every time), the location information is not
provided.
● When the location information is requested from a person
who uses “imadocokantan search”, the FOMA terminal
operates as follows.
- The confirmation screen appears every time you
are requested. If you select [Send Loc.], the rough
positioning result is immediately notified to the person
who requests it. After you select [Send Loc.], the
GPS positioning display appears. The high-detailed
positioning result is notified after the GPS positioning.
- After you select [Send Loc.] and you cancel providing
the location, the rough positioning result is notified to the
person who requests it. In this case, the Location history
is saved but location information is not displayed.
● The location information may be sent depending on the
timing of cancellation.
● Even if the location information may have been sent, the
service provider that supports the Location provision
function may not have received it depending on the radio
wave condition.
● When 2in1 is used, the location information is provided,
regardless of the 2in1 mode.
● Some Service client IDs may not be displayed.