NTT docomo FOMA SO905i 07.11, Руководство пользователя

Страница: 165 / 470

163
i-mode/i-motion/i-Channel
Displaying a Site Correctly
If the display of the text is incorrect on a site, you can
reload the page after changing the character code.
1
While displaying a site, press (Func).
The Function menu appears.
2
Select [Word translate] → [Convert]/[Auto select]
and press .
[Convert]:
Sequentially convert the character codes and display
the page again. If the text is still incorrectly displayed,
repeat this operation. The original display reappears
when you repeat [Word translate]
→
[Convert] several
times.
[Auto select]:
Automatically select and convert the character code and
display the page.
The character code is converted and the page is displayed
again.
● The page may not be displayed correctly even if the
character code is changed. Note that changing the
character code when the page is displayed correctly may
cause the page to be displayed incorrectly.
Changing the Display to Full Browser
You can change the current site display to Full Browser.
1
While displaying a site, press (Func).
The Function menu appears.
2
Select [To Full Browser] → [OK] and press .
The display is switched to Full Browser.

For information on the operations of Full Browser, see
P.258.
What is Flash?
Flash is an animation technology that uses animation
and sound. Flash movies enhance site content for
richer expression. You can set a Flash movie for the
stand-by display and other applications.
● When a Flash movie is displayed, the action may differ
from other sites.
● Even if (Select) is displayed, you may not be able to
use the Select function.
● Some Flash movies may be accompanied by a sound effect.
To mute the sound effect, set the Sound effect to [OFF].
● If you do not operate the FOMA terminal for more than
about 30 seconds while the Flash movie is played back,
the playback pauses. To operate a Flash movie again,
from the Function menu, select [Retry]. If the playback is
not started, either display the Flash movie entirely or adjust
the display position until it can be played back.
● Even if a Flash movie is displayed, it may not operate
properly in some cases.
● When you save a Flash movie using the Save image
function or save it in Screen Memo, a portion of it may not
be saved or it may appear differently from the one you
viewed on the site.
● When you play back a Flash movie saved in the Data Box,
Screen Memo, or microSD memory card, the image may
be displayed differently depending on the saved places.
● If an error occurs during a Flash movie playback, this
Flash movie cannot be saved.
● Some of the Flash movies vibrate the FOMA terminal
during playback. Note that this could happen even if the
vibrator is set to [OFF].
● Some Flash movies may have to use data saved in the
i-mode terminal. To allow such a Flash movie to use saved
data, set the Use phone info of the i-mode setting to [Yes]
(P.170). This item is set to [Yes] at the time of purchase.
Saved data that may be used by a Flash movie is as follows.
- Battery level -
Reception level - Clock information
- Sound effect setting - Language setting - Terminal type
- Model information
Terminating i-mode
1
Press during i-mode, select [Yes], and press .
i-mode is terminated and “ ” disappears.