NTT docomo FOMA SO905i 07.11, Руководство пользователя

Страница: 204 / 470

202
Mail
 You can exchange SMS with recipients/senders who
subscribe to an overseas telecommunication company other
than DoCoMo. See the NTT DoCoMo website for information
about countries and overseas telecommunication companies
you can use for sending/receiving SMS.

Even if the Notify caller ID is set to [Not notify], an SMS
recipient is notified of the sender’s phone number.
 The text of sent message may not be displayed correctly
on the recipient’s terminal depending on the radio wave
condition or the type of characters to be sent.
1
From the Mail menu, select [Compose SMS] and
press
.
Ｒ．７０ｃｈａｒ
Ｅｄｉｔ ＳＭＳ
2
Enter a phone number at [ ].
Enter a phone number within 21 digits.
W h e n a r e c i p i e n t s u b s c r i b e s t o a n o v e r s e a s
telecommunication company other than DoCoMo
Enter “+” (press for over a second), “Country
code”, and “recipient’s mobile phone number”, in this
order. When the mobile phone number starts with “0”,
enter the number without “0”. You can also send SMS by
entering “010”, “Country code”, and “recipient’s mobile
phone number”, in this order. (To reply to SMS received
from overseas, use the latter method using “010”.)
3
Enter a main body at [ ].
When you set [Language] to [JPN] for the SMS setting,
enter the SMS main body within 70 characters regardless
of full-width or half-width.
When you set it to [ENG], enter the main body within 160
half-width characters (excluding `,
。 , 「 , 」 , 、 , ・ , ”, and ゜ ).
Use of the symbols (|^{}[]
~
¥) reduces the number of
characters that can be sent.
4
Press (Send).
The SMS is sent.
To save SMS without sending it
From the Function menu, select [Save]. The SMS is
saved in [Draft].
● While editing SMS, when you change the font size, from
the Function menu, from [Input method] → [Font size],
the setting is only applied for the font size in the matching
word list. The setting for the font size of an address and
main body text is changed from the next time when you
activate mail (P.119).
● When you subscribe to the Multi Number Service, set
[Basic Number] for the Set Multi Number.
● When 2in1 is set to the B mode, you cannot compose
SMS.
● You cannot send SMS from Number B.
3
Enter the Security code and press (OK).
Ｅｄｉｔ Ａｒｅａ Ｍａｉｌ ｎａｍｅ
Ａｒｅａ Ｍａｉｌ ｎａｍｅ
Ｍｅｓｓａｇｅ ＩＤ
（Ａ４００−Ａ７ＦＦ）
[Area Mail name]:
Enter the Area Mail name within 15 full-width or 30 half-
width characters.
[Message ID]:
E n t e r t h e M e s s a g e I D f r o m A 4 0 0 t o A 7 F F ( i n
hexadecimal).
4
Enter each item.
5
Press (Complete).
The entered entry is saved.
● You cannot edit/delete the pre-saved [Emergency
information].
Setting the Operation While Receiving
Area Mail
You can set whether to sound the beep and activate
the vibrator when you receive Area Mail of the urgent
earthquake news flash, and the ring time of the beep.
The Beep setting is set to [Permission] and the Beep
time is set to [10sec] at the time of purchase.
1
From the Mail menu, select [Mail setting] → [Area
Mail setting] and press .
Ａｒｅａ Ｍａｉｌ ｓｅｔｔｉｎｇ
Ｒｅｃｅｉｖｅ ｓｅｔｔｉｎｇ ＯＮ
Ｒｅｃｅｉｖｅ ｅｎｔｒｙ
Ｂｅｅｐ ｓｅｔｔｉｎｇ
Ｐｅｒｍｉｓｓｉｏｎ
Ｂｅｅｐ ｔｉｍｅ １０ ｓｅｃ
（０１−３０）
2
Select [Permission]/[Non-permission] at [Beep
setting].
[Permission]:
The beep sounds and the vibrator is active.
[Non-permission]:
Neither the beep nor the vibrator activates.
3
Enter the ring time of the beep at [Beep time].
Enter the ring time within 01 to 30 seconds.
Composing and Sending SMS
<Compose and send SMS>
Regardless of whether you subscribe to i-mode, you
can send/receive text messages between FOMA
terminals.