NTT docomo FOMA SO905i 07.11, Руководство пользователя

Страница: 331 / 470

329
Other Con
v
enient Functions
● When you place a call to a toll-free number such as
NTT Free Dial or Directory Assistance (104), “0YEN” or
“
＊＊＊＊＊＊
YEN” indicated for the call charge.
● The accumulated call charges are stored in the UIM.
Therefore, if you switch the UIM, the accumulated total call
charge (starting from December 2004) is displayed.
※ FOMA terminals manufactured earlier than the 901i
series are not capable of displaying the accumulated
call charges stored in the UIM. (The charges, however,
are stored in the UIM used by the older terminals.)
● The duration and charge for PushTalk, i-mode, and packet
communication are not counted. For details on how to
check charges for i-mode, etc., see the “Mobile Phone
User’s Guide
【 i-mode 】 FOMA version” that you receive
when you subscribe to i-mode.
●
When the call duration for the last voice call or digital
communication exceeds 99 hours, 59 minutes, and 59
seconds or the total call duration for voice calls or digital
communication exceeds 9,999 hours, 59 minutes, and 59
seconds, “Over” is displayed.
● The ring time for incoming and outgoing calls are not
counted.
●
The transmission charge for Chaku-moji is not counted.
● When you use WORLD CALL, the international call charge
is counted. When you use other international call services
other than WORLD CALL, the call charge is not counted.
● When you switch between voice and videophone calls
during a call, the call duration and call charge are counted
separately for each call type and incremented at [Voice
call] or [Digital] alternately every time you switch the call.
● When 2in1 is used, the total call duration and charge
of both Number A and Number B are summed up and
displayed.
Resetting the Total Call Duration and
Charge
The display of the total call duration and charge can be
reset. The count starts from 0 after the reset.
Example: Resetting the total call duration
1
From the Menu, select [Settings] → [Management]
→ [NW Services] → [Call Cost/Duration] → [Reset]
and press .
Ｓｅｌｅｃｔ ｒｅｓｅｔ
ｉｔｅｍ
Ｔｏｔａｌ ｄｕｒａｔｉｏｎ
Ｔｏｔａｌ ｃｏｓｔ
2
Select [Total duration] and press .
The Security code screen appears.
To reset the total call charge
Select [Total cost], enter the PIN2 code, and select [Yes].
3
Enter the Security code and press (OK).
The screen for confirming whether to reset appears.
4
Select [Yes] and press .
The total call duration is reset and the reset date/time are
updated.
Automatically Resetting the Total Call
Charge
You can set to automatically reset the total call charge
at 00:00 a.m. on the first day of every month.
1
From the Menu, select [Settings] → [Management]
→
[NW Services]
→
[Call Cost/Duration]
→
[Auto
reset] and press .
The PIN2 code input screen appears.
2
Enter the PIN2 code and press (OK).
The Auto reset display appears.
3
Select [ON]/[OFF] and press .
The Auto reset is set.
Setting the Limit for Alert on
the Total Call Charge
<Cost limit notice>
You can set an upper limit amount of call charges to
alert yourself with an icon or alarm tone when the total
call charge exceeds this limit value.
1
From the Menu, select [Settings]
→
[Management]
→ [NW Services] → [Call Cost/Duration] → [Cost
limit notice] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
Ｃａｌｌ ｃｏｓｔ ｌｉｍｉｔ
Ｓｅｔ ＯＦＦ
Ｌｉｍｉｔ
０ＹＥＮ
（１０−１０００００）
Ｎｏｔｉｆｉｃａｔｉｏｎ
Ａｌａｒｍ＋Ｓｔａｎｄ−ｂｙ
3
Select [ON]/[OFF] for the Call limit notice at [Set].
4
Enter a value at [Limit].
Enter from ¥10 to ¥100,000 (in increments of ¥10).
5
Select a notification method at [Notification].
[Alarm+Stand-by]:
Display the icon in the stand-by display and sound an
alarm tone to alert you at the same time.
[Stand-by]:
Display the icon in the stand-by display to alert you.
6
Press (Complete).
The Call cost limit is set.
Continued