ID50 Series Panel - Installation, Commissioning & Configuration Manual
Appendix 1 - S
pecifications
A1 - 5
997-263, Issue 4
September 2002
DC Auxiliary Rating
Output voltage range:
26 to 28V
Maximum load:
Quiescent:
150mA*
Alarm:
0.25A*
Cables should be capable of
carrying a minimum 1A.
Fuse rating:
Not applicable
Note:
It is recommended that the auxiliary output
should not be used in the quiescent state other
than to provide a supply to drive ancillary devices
power indicators.
RS485 Serial Port (Optional)
Isolation:
Functional at 30V.
Baud rate:
1200 Baud.
Connector:
Terminal block on RS485 Interface
Module PCB.
Maximum cable length: 1200metres (minimum of 1.5mm
2
screened cable recommended)
Configuring
Configuration methods: Front panel keypad.
Offline using PC Offline Support
Tool program.
Configuration access: Keypad access is passcode-
protected (user-definable) for all
configuration.
Refer to
Sections 4 & 5
of this
manual, and to
997-264 ID50
Series Panel Operating Manual,
Section 4
for further information.
Default Configuration Passcodes:
Level 2 Passcode
2 2 2 2
Level 3 Passcode
3 3 3 3
Repeaters/Mimics
Refer to
997-411, IDR-2A, 2P & 6A Repeaters User
Manual
and
997-412, IDR Mimic Installation and
Commissioning Manual
for the specification.
* Total system load is limited by the
transformer output. The Notifier Loop
and Battery Calculator Support Tool,
should be used to ensure that the system
is NOT overloaded.
Содержание ID50 SERIES
Страница 1: ...ID50 60 installation commissioning configuration manual 997 263 Issue 4 September 2002...
Страница 2: ......
