Notifier ID50 SERIES, Инструкция по установке, пусконаладке и конфигурации

Страница: 48 / 94

ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration
Mode
42 997-263, Issue 4
September 2002
5.5.8 Pulse On/Off Ratio
The Pulse On/Off Ratio option is used to set the sounder
output pulse ratio to either 1/1 or 4/1. To configure the
ratio:
1 From the Commissioning menu, use the numeric keypad
and press the ‘
1
’ button to enter the Setup menu.
2 Press the ‘
2
/
8
’ buttons to step through the Setup
menus until the LCD shows the Pulse On/Off Ratio
menu.
3 Press the ‘
6
’ button to change the required setting
to either 1/1 or 4/1.
4 Press ‘
4
’ to return to the Commissioning menu.
5.5.9 Service Phone Number
This option allows a service contact phone number to be
displayed with fault messages. To enter or change the
number:
1 From the Commissioning menu, press the ‘
1
’ button
on the numeric keypad to enter the Setup menu.
2 Press the ‘
2
/
8
’ buttons to step through the Setup
menus until the Service Phone Number menu is
displayed.
3 Press the ‘
6
’ button to enter the text editing menu.
The existing 20-characters of text are shown on the upper
line. The current cursor position is indicated by a flashing
character. Enter the required telephone number via the
numeric keypad or use the ‘
2
/
8
’ buttons to scroll
through the available alphanumeric characters.
Note: For further information on how to edit text, refer to
Section 5.8, Zone Texts .
4 Press the ‘
5
’ button to confirm and return to the
Setup menu.
[Setup] Pulse On/Off ratio = 1/1
> : Change × : More < : Exit
[Setup] Pulse On/Off ratio = 4/1
> : Change × : More < : Exit
[ ] × : Char
3
: Done
> : Next < : Previous u1:Delete u3:Insert
[Setup] Phone = < blank/existing text >
> : Change × : More < : Exit
[Setup] Language = English
> : Change × : More < : Exit
[Setup] Language = English
> : Change × : More < : Exit
1
or
8 2
6
1
or
8 2
6