ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration
Mode
51
997-263, Issue 4
September 2002
5.6 Circuit Options
The Circuit options menu offers the facility to individually
auto-configure, manually learn or view the following
circuits:
a. Signalling Line Circuit - SLC (loop)
b. On-Board Output Circuits - including sounder, control
and relay circuits.
To select the Circuit options menu:
1
From the Commissioning menu, press the
2
button
on the numeric keypad to access the Circuit option
menu.
2
The LCD displays the Circuit options available.
3
Select the number corresponding to the type of circuit
that requires changing, i.e.
1
for the SLC Loop, or
2
for On-Board.
The LCD then displays the appropriate Circuit menu
display.
5.6.1 Signalling Line Circuit (SLC) - Devices
This option enables the manual configuration of devices
to a pre-configured analogue addressable SLC loop.
To manually learn devices on the SLC loop:
1
From the Circuit menu, below, using the numeric
keypad press
1
to select the SLC loop
configuration.
2
The LCD displays the Devices and the Learn options.
Using the numeric keypad, press
1
to select the
Devices menu.
3
Select a device option by using the numeric keypad
and pressing
1
to configure sensors or
2
to
configure modules (see
Input Modules
and
Output
Modules
overleaf).
[S1 COMM] 1 : Setup
2 : Circuit
3 : CBE Rules
4 : Zones 5 : Access
×
: More
[S1 Circuit]
1 : SLC Loop 2 : On-Board
[S1 Circuit]
1 : SLC Loop 2 : On-Board
[S1 SLC]
1 : Devices
2 : Learn
[S1 Device] 1 : Sensors
2 : Modules
2
1
1
Содержание ID50 SERIES
Страница 1: ...ID50 60 installation commissioning configuration manual 997 263 Issue 4 September 2002...
Страница 2: ......
