Notifier ID50 SERIES, Инструкция по установке, пусконаладке и конфигурации

Страница: 42 / 94

ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration
Mode
36 997-263, Issue 4
September 2002
5 Configuration
5.1 Introduction
The following sections contain instructions to configure
a panel.
For each configuration option, a brief description of its
purpose is given, followed by the configuration procedure
accompanied by illustrations of appropriate LCD displays.
The panels use menu-driven software which is divided
into Level 2 Configuration Options (see Section 5.3 ) and
Level 3 Configuration Options (see Sections 5.4 - 5.11 ).
5.2 Navigation and Number Entry
To navigate around the menus and enter numeric values,
refer to the ID50 Series Operating Manual 997-264,
Section 4.6 .
5.3 Level 2 Configuration Options
The Level 2 Configuration Options are described in the
ID50 Series Panel Operating Manual 997-264 . The
applicable sections are listed below:
a. Test - Section 4.8
b. Disable/Enable - Section 4.9
c. Clock - Section 4.10
d. View Mode - Section 4.11
e. Commission - Section 4.12 .
The Operating Manual also includes a Level 2 menu
map.
For the default Level 2 passcode refer to Appendix 1 -
Specifications .