Nortel Passport 15000, Установка и обслуживание оборудования, Страница: 623 / 874

Chapter 17 Hardware procedures 623
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade 5.2S2
9 Repeat step 2 to step 4 for the right adapter bracket. Ensure the column
of wider holes is at the right side.
10 Fasten 14 more screws through the adapter brackets into the uprights, 7
per side. Space the screws apart leaving 3 empty holes. Tighten all
screws to snug plus a 1/4-turn.
11 Re-install the cable management brackets in their original positions.
12 Remove the rear adapter bracket (part number P0907006) from the
hardware kit NTHW14.
13 Hold the bracket so that
• the large square hole is at the bottom
• the screw homes are to the left and right
• the bent lips of the bracket are pointed away from you
14 Locate the 16th hole from the top on the two rear frame uprights.
15 Fasten a 10-mm (3/8-in.) screw through the top left hole of the bracket into
the marked hole in the upright (hole 16).
16 Fasten a 10-mm (3/8-in.) screw through the top right hole of the bracket
into the marked hole in the upright (hole 16).
17 Fasten 10 more screws through the adapter bracket into the uprights, 5
per side. Tighten all screws to snug plus a 1/4-turn.
18 Re-install the cable management brackets in their original positions.