Nortel DualMode 800, Руководство по обслуживанию

Страница: 148 / 216

11-10 DRU tests
411-2051-500 Draft 00.01 November 1999
Transmit Power Level Index
If the TxPwrIndex status is not 0, set it to 0 by entering:
>E
The TRU will request a specific power level (0..7). To set power level to 0,
enter:
>0
The TxPwrIndex field on the screen should show:
TxPwrIndex: 0
Transmit Power Step Size
If the TxPwrStep status is not 4, set it to 4 by entering:
>U
The TRU will request a power step size (1..4 in 0.25 dB increments). To set
power step size to 4, enter:
>4
The TxPwrStep field on the screen should show:
TxPwrStep: 4
Maximum Transmit Power
If the PA Max power status is not 15.0 dBm, set it to 15.0 dBm by entering:
>F
The TRU will request a power level (-1.0...27.0 in dBm). To set Max power to
15.0, enter:
>15.0
The MaxTxPwr field on the screen should show:
MaxTxPwr: 15.00
Audio Status
If the TX and RX audio status is either ‘TX’, ‘RX’ or ‘TX RX’, turn the
audio off by entering:
>R
The DRU will request for either ‘TX’, ‘RX’, ‘BOTH’ or ‘OFF’. Enter:
>OFF
The Audio field on the screen should show:
Audio: off