Nipro SURDIAL, Руководство по обслуживанию

Страница: 250 / 334

10.5-2
(7) Apply pressure to pressure SW by gradual advancement of syringe plunger.
(8) Adjust pressure SW so that it is ON at a pressure between 0.06865 and 0.07845 MPa (514.5
to 588mmHg / 0.7 to 0.8kgf/cm
2
) by loosening set nut using spanner followed by turning
adjusting screw. ON of pressure SW can be found by ON of PS in maintenance mode 4
screen or clicking of micro SW.
(9) After the adjustment, tighten the set nut. This may cause small change of pressure when
pressure SW is ON. Recheck the ON pressure.
(10) Then retract the syringe plunger gradually to check that pressure SW is OFF at a pressure of
0.0588 MPa (441mmHg / 0.6kgf/cm
2
).
SW function ON/OFF pressure
ON 0.06865 to 0.07845 MPa (514.5 to 588mmHg / 0.7 to 0.8kgf/cm
2
)
OFF
0.0588 MPa (441mmHg / 0.6kgf/cm
2
)
(11) Remove the syringe and manometer and return the pressure SW connection to the original.
(12) Return the removed cover to the original position.