Nipro SURDIAL, Руководство по обслуживанию

Страница: 235 / 334

10.1-1
10.1. Measurement of chamber capacity
and adjustment of silicone volume
10.1.1. Measurement of chamber capacity
In the cases such as replacement of viscous chamber or viscous pump, silicone oil volume in the
chamber may be changed. Measure the chamber capacity based on the below procedures and
input the measured result into machine.
(1) Required devices
Electronic balance ( 0.2g as minimum unit)
Container (to be placed on the balance ( 2000mL)
Forceps
(2) Turn on power SW of machine.
(3) Turn on [DIALYSIS] SW to shift to dialysis wait process.
(4) Release setting protection by selecting ON of “20.MAINTENANCE MODE FREE” in
maintenance mode 7 screen.
(5) Set machine operation to console mode by selecting ON of “19.CONSOLE MODE” in
maintenance mode 7 screen.
(6) By pressing [PRIP.] SW to shift to preparation process, machine is started from console mode.
(7) Check dialysate temperature stabilization.
(8) Isolate air discharge line of AS1 from drain line by clamping upper tube of AS1 by forceps or
the like.