Nipro SURDIAL, Руководство по обслуживанию, Страница: 207 / 334

9.5-1
9.5. Maintenance mode 2 screen
In maintenance mode 2 screen, alarm value can be set. When setting is protected, indication only is
enabled and setting is disabled.
Press [F 3] or [F 4] SW to check data. If setting is not protected, press [F 1]or [F 2] SW to change
set value.
Press [F 5] SW to display maintenance mode menu screen.
Fig. 9.5-1 Maintenance mode 2 screen
INDICATION DESCRIPTION
1.V.PRESS MAX RANGE Auto-setting of upper venous pressure alarm limit
2.V.PRESS MIN RANGE Auto-setting of lower venous pressure alarm limit
3.A.PRESS MAX RANGE Auto-setting of upper arterial pressure alarm limit
4.A.PRESS MIN RANGE Auto-setting of lower arterial pressure alarm limit
5.D.PRESS MAX RANGE Auto-setting of upper dialysate pressure alarm limit
6.D.PRESS MIN RANGE Auto-setting of lower dialysate pressure alarm limit
7.TMP(I) Setting of TMP alarm limit
8.CONDUCTIVITY MAX Setting of upper conductivity alarm limit
9.CONDUCTIVITY MIN Setting of lower conductivity alarm limit
10.TEMPERATURE MAX Setting of upper dialysate temperature alarm limit
11.TEMPERATURE MIN Setting of lower dialysate temperature alarm limit
12.BLOOD LEAK Setting of blood leak alarm limit
13.UF MAX AGAINST BLF Setting of upper UF alarm limit
14.SN HIGH/LOW RANGE Setting of upper and lower SN alarm limits
15.SN STROKE TIME Setting of SN stroke time alarm limit
16.VCS UF LEAK TEST Setting of leak detection level from closed circuit
17.UF LEAK VALUE a Setting of leak detection level a from closed circuit
18.UF LEAK VALUE b Setting of leak detection level b from closed circuit
19.UF LEAK TIME c Setting of leak detection time c from closed circuit
20.UF LEAK TIME d Setting of leak detection time d from closed circuit
21.RESET SW TIME Setting of no reset SW press alarm time
22.DIALYSIS SW TIME Setting of no dialysis SW press alarm time
23.BYPASS SW TIME Setting of no bypass SW press alarm time