Nipro SURDIAL, Руководство по обслуживанию, Страница: 212 / 334

9.7-2
SYMBOL COMPONENT
FUNCTION WHEN
SYMBOL IS MARKED
WITH IN DRAWING
Monitor
Enabled
control
-ing
NOTE
H Heater During power supply
BP Blood pump During power supply
SP Syringe pump During power supply
PH1 Viscous pump position sensor Shaded photo-sensor Original
point
detection
PH2 Viscous pump position sensor Shaded photo-sensor Rotation
signal
PH3 Viscous pump position sensor Shaded photo-sensor Original
point
detection
PH4 Viscous pump position sensor Shaded photo-sensor Rotation
signal
LS2 Coupler SW Coupler being set
LS3 Syringe overload SW Overload detection
LS5 Clamp position sensor Being clamped
PS Pressure SW Pressurized water
FS Flow sensor Float drop
FSW Float SW Air detection
P1F P1 pump fuse Burnt out
P2F P2 pimp fuse Burnt out
ܭ
DANGER
z DO NOT operate any component manually under the condition that patient is connected to
machine to avoid his/her injury.
ܭ
CAUTION
z
Manual operation of any component should be performed by engineer familiar with its
construction and function.
z DO NOT operate P1 or P2 pump without priming with fluid. Empty run may caused the pump
failure.