Nipro SURDIAL, Руководство по обслуживанию, Страница: 236 / 334

10.1-2
(9) Measure RO water weight discharged from each of A and B chambers when each of [V5 and
V6]and [V7 and V8] are ON using electronic balance under referring to data displayed in
maintenance mode 4 screen to derive each of the A and B chamber capacities respectively.
Calculate mean value of 3 measurements for each of the chambers.
A chamber capacity when V5 and V6 are ON
B chamber capacity When V7 and V8 are ON
Fig. 10.1-1 Measurement of chamber capacity
(10) Each of the capacities should satisfy the below requirement. If not so, adjust silicone oil
volume in each of the chambers followed by performing the measurement 3 times for each of
them.
345mL(g) chamber capacity 405mL(g)
(11) Input the chamber capacities in maintenance mode 6 screen.
A chamber capacity 9.VCa VOLUME (mL)
B chamber capacity 10.VCb VOLUME (mL)
(12) Turn on [DIALYSIS] SW to shift to dialysis wait process.
(13) Release console mode by selecting OFF of “19.CONSOLE MODE” in maintenance mode 7
screen.
(14) Protect setting by selecting OFF of “20.MAINTENANCE MODE FREE” in maintenance mode 7
screen.