Nipro SURDIAL, Руководство по обслуживанию, Страница: 213 / 334

9.8-1
9.8. Maintenance mode 5 screen
In maintenance 5 screen, dialysate concentration can be set and information related to dialysate
preparation in dialysis mode selected in setting screen can be indicated.
9.8.1. When dialysis mode BC1 or BC2 is set
Currently set dialysis mode is found in screen title. If setting is protected, indication only is enabled
and setting is disabled. Indicated items are common to both BC1 and BC2, while value different
from other can be set.
Press [F 3] or [F 4] SW to check data. If not protected, press [F 1] or [F 2] SW to change setting.
Press [F 5] SW to display maintenance mode menu screen.
( )
Fig. 9.8-1 Maintenance mode 5 screen (when BC1 mode is set)
INDICATION DESCRIPTION
1.VCa W+A RATIO
Setting of [water A] ratio in A chamber
2.VCb W+A RATIO
Setting of [water A] ratio in B chamber
3.THEORETICAL W+A
Setting of theoretical [water A] concentration
4.VCa W+B RATIO
Setting of [water A] ratio in A chamber
5.VCb W+B RATIO
Setting of [water A] ratio in B chamber
6.THEORETICAL W+B
Setting of theoretical [water B] concentration
7.CHAMBER Indication of functioning chamber. Disabled setting
8.MODE Setting of dialysate preparation function at calibration
9.COND. W+A+B
Calibration of [water A B] conductivity
10.CONC. W+A+B
Calibration of [water A B] concentration
ܭ
CAUTION
z Both BC1 and BC2 are bicarbonate dialysis modes. If different dialysate preparation information
is registered, it is recommended to record that the information is registered in which mode BC1
or BC2 after checking concentrate type to be used.
z See “Concentration Calibration Procedure”.