Nipro SURDIAL, Руководство по обслуживанию, Страница: 200 / 334

9.2-2
(2) Press [F 3] or [F 4] SW to display "20. MAINTENANCE MODE FREE".
(3) Press [F 1] SW to set to "ON".
(4) Operation SW’s [ ]/[ ] are displayed above [F 1][F 2] and items enabled to be set
blink.
ܭ
DANGER
z Setting or setting change of item to be maintained during dialysis is danger. DO NOT set or
change item to be maintained under the condition that patient is connected to machine.
z DO NOT change set value without direction of doctor or technician.
z Protect modes 2, 4, 5, 6 and 7 to prevent malfunction of machine always by setting
"20.MAINTENANCE MODE FREE" to OFF. Release the protection only when setting change is
required.
ܭ
CAUTION
z If ROM of different version is loaded, some maintenance values may be initialized. In such case,
reset the values.
z When ROM or main board is replaced, or CPU is reset, set maintenance mode values followed
by checking them.
z It is recommended to record maintenance mode values. Use supplement of this service manual
to record them.