Nipro SURDIAL, Руководство по обслуживанию, Страница: 214 / 334

9.8-2
9.8.2. When dialysis mode AC is set
Currently set dialysis mode is found in screen title. If setting is protected, indication only is enabled
and setting is disabled.
Press [F 3] or [F 4] SW to check data. If not protected, press [F 1] or [F 2] SW to change setting.
Press [F 5] SW to display maintenance mode menu screen.
( )
Fig. 9.8-2 Maintenance mode 5 screen (when AC mode is set)
INDICATION DESCRIPTION
1.VCa W+AC RATIO
Setting of [water AC] ratio in A chamber
2.VCb W+AC RATIO
Setting of [water AC] ratio in B chamber
3.THEORETICAL W+AC
Setting of theoretical [water AC] concentration
4.CHAMBER Indication of functioning chamber. Disabled setting
5.MODE Setting of dialysate preparation function at calibration
6.COND. W+AC
Calibration of [water AC] conductivity
7.CONC. W+AC
Calibration of [water AC] concentration
ܭ
CAUTION
z AC is acetate dialysis mode. It is recommended to record registered information after checking
concentrate type to be used.
z See “Concentration Calibration Procedure”.