Native Instruments Maschine, Руководство пользователя

Страница: 468 / 730

Parameter Description
INPUT Section
Source Selects the audio signal you want to use as side-chain signal to
control the Plug-in. Available options are None (side-chain
disabled, default setting), the outputs of all (other) Sounds , and
the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums )
For Sounds: [Group name]: [Sound name] (e.g., Drums: Kick )
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums )
For Sounds: [Group number]:S[Sound number] (e.g., A1:S4 for
the Sound 4 of Group A1)
Gain Adjusts the input level of the side-chain signal fed into the Plug-in.
FILTER Section
Filter Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq Adjusts the center frequency of the filter.
Width Adjusts the bandwidth of the filter.
On your controller the outputs available in the SOURCE parameter are labeled as in the
display of the Source selector described above.
Note that the settings of the Side-Chain Input page stay in place when you switch to an-
other Plug-in supporting side-chain. This notably allows you to try different compressors
or different compression presets without losing the side-chain setup.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE 2 - Manual - 468