© Munters AB, 2015
53
•
Feeder: Check mark feed lines to turn on, dot the ones to turn off.
•
Feed: Enter the quantity of feed provided from the silos during the From/To time.
o
You can provide feed from multiple silos, enabling specific feed mixes.
o
Distribution continues until the To Time or until the defined quantity is reached, whichever
comes first.
o
If a relay is not defined as an auger the Feed numbers still appear. However any quantity
entered is meaningless.
Water runs continually between the From/To times. Only feed is distributed in cycles.
NOTE:
This function only works when relays are defined as augers and each silo is mapped to an
auger. Defining a digital sensor as a feed count does not enable Control by Quantity.
NOTE:
If both Control via Quantity and a digital feed counter are enabled, Control via Quantity takes
priority.
4.9.3
W
ATER AND
F
EED
H
ELP
|
S
ET
D
EFINITIONS
These parameters define the feed and water delivery schedule through the week.
NOTE:
The Water and Feed parameters work in conjunction with the Lighting parameters.
•
Feed Day Cycle:
o
Daily: Same schedule for every day of the week.
o
2 – 6 Days: Select a cycle that lasts the number of days chosen and then repeats itself.
For example, 2 Days means that the cycle lasts two days and then repeats itself.
o
Week: Select which days in the week that feed and water are delivered.
•
Quantity: Enable this feature to enable Control by Quantity.
NOTE:
If you choose Daily, the Scale function is always enabled. If you choose 2- 6 Days or Week,
the Scale function is
disabled
on non-feeding days.
SYSTEM PARAMETERS
WATER & FEEDS
2 DAYS
YES
Feed Day Cycle
Quantity
DAYS CYCLE
Day: 1 2
Feed: √
WATER ON NO FEED DAYS
Start
Stop
Start Stop
10;00
10:30 11:30 12:30
SYSTEM PARAMETERS
WATER & FEEDS
WEEK
YES
Feed Day Cycle
Quantity
DAYS CYCLE
Day:
SUN MON TUE WED THU FRI SAT
Feed: √
√
√
√
WATER ON NO FEED DAYS
Start
Stop
Start
Stop
10:00
10:30
11:30
12:30
