Munters Farm P-XL Скачать руководство пользователя страница 101

Страница: 101 / 134

101

9.11

Save Settings

The method used to save the controller's settings to an external memory device is dependent on the
hardware employed.

NOTE:

If both a data plug and SD card are inserted, the data plug takes priority and that option
appears on the screen.

•

Saving to a Data Plug

•

Saving to an SD Card

9.11.1

AVING TO A

ATA

LUG

This menu enables the user to save his program settings to the supplied data plug and transport them to
another controller for quick programming.

1. Insert data plug as shown.
2. Save controller settings.

9.11.2

AVING TO AN

ARD

This menu enables the user to save the program settings to an SD card and transport them to another
controller.

NOTE:

If both a data plug and SD card are inserted, the data plug takes priority and that option
appears on the screen.



Verify that the SD card is in place.



The SD card must have at least 20K of free space.

To save settings:
1. Go to Service > Save Settings.
2. In the screen that appears, select YES and press Enter.
3. Select the required settings and press Enter.
4. Wait for the settings to download.

ACTION WILL OVERWRITE

EXISTING DATA PLUG!!

ARE YOU SURE

YES

Содержание Farm P-XL







































































































































Результаты поиска

Содержание Farm P-XL

Отзывы:

Бренды по названию

Популярные бренды

Munters Farm P-XL, Руководство пользователя

Результаты поиска

Содержание Farm P-XL

Отзывы:

Бренды по названию

Популярные бренды