manualshive.com logo in svg

MR TAPCON, Руководство по эксплуатации

Поделиться
Скачать
MR TAPCON Скачать руководство пользователя страница 236

8 Operation

Maschinenfabrik Reinhausen GmbH 2020

236

3587317/21 EN

TAPCON

®

Property

Options

Configuration

DI: High active or low active

DO: N/O contact (NO), N/C contact (NC); Note: If the device is dis-
connected or in the event of an error, the digital outputs are always
open (no bi-stable relay).

Assembly/
channel

Channel of the DIO assembly to which the function is linked. Func-
tions that are not linked with a channel are identified with "-". Note
the connection diagram supplied.

Table 83: Configuration of the digital inputs and outputs

Figure 167: Configuring digital inputs and outputs

The operation described below is only possible if you access the visualiza-
tion using a computer. You can only change the configuration of the digital
inputs and outputs if you have a Parameter Configurator or Administrator
role.

When in delivery status, you can log in as the administrator as follows:

▪ User name: 

admin

▪ Password: 

admin

Creating a backup

You need to create a backup to be able to reset the system in the event that
any incorrect configuration settings are made. To do so, proceed as follows:

1. Go to 

Settings > Export

.

2. Go to the option 

Settings

 to export a backup copy of the current settings.

3. Select the desired 

Interface

 (USB or PC).

4. Press the 

Export

 button to start the export.

Configuring DIO

To configure the device's digital inputs and outputs, proceed as follows:

1. Go to menu item 

Settings > DIO configuration

.

2. Where necessary, select the buttons ▲ or ▼ to sort the properties in a

column alphabetically.

3. Configure the properties as desired.

Содержание TAPCON















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды