manualshive.com logo in svg

MR TAPCON, Руководство по эксплуатации

Поделиться
Скачать
MR TAPCON Скачать руководство пользователя страница 14

2 Safety

Maschinenfabrik Reinhausen GmbH 2020

14

3587317/21 EN

TAPCON

®

2 Safety

▪ Read this technical file through to familiarize yourself with the product.

▪ This technical file is a part of the product.

▪ Read and observe the safety instructions provided in this chapter.

▪ Read and observe the warnings in this technical file in order to avoid func-

tion-related dangers.

▪ The product is manufactured on the basis of state-of-the-art technology.

Nevertheless, risks to life and limb for the user or impairment of the prod-
uct and other material assets due to the function may arise in the event of
improper use.

2.1 Appropriate use

The TAPCON® keeps the output voltage of a transformer with an on-load
tap-changer constant. The product is designed solely for use in stationary
large-scale electrical energy systems and facilities.

If used as intended, in compliance with the requirements and conditions
specified in this technical file and observing the warning notices in this tech-
nical file and attached to the product, the product does not pose risk of injury
or damage to property or the environment. This applies across the entire
service life of the product, from delivery to installation and operation through
to disassembly and disposal.

The following is considered appropriate use:

▪ You will find the standard valid for the product and the year of issue on the

nameplate.

▪ Operate the product in accordance with this technical file, the agreed-

upon delivery conditions and the technical data.

▪ Ensure that all necessary work is performed by qualified personnel only.

▪ Only use the equipment and special tools included in delivery for the in-

tended purpose and in accordance with the specifications of this technical
file.

▪ Only operate the product in industrial areas.

▪ Observe the notices in this technical file regarding electromagnetic com-

patibility and the technical data.

2.2 Fundamental safety instructions

To prevent accidents, malfunctions and damage as well as unacceptable ad-
verse effects on the environment, those responsible for transport, installa-
tion, operation, maintenance and disposal of the product or parts of the prod-
uct must ensure the following:

Содержание TAPCON















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды