MKS GMW-25, Руководство по эксплуатации

Страница: 64 / 98

Operation
3-6 GMW-25
To select the mode, do the following:
1. At the command prompt (
*
), type the LLT command with a 0 or 1
and press ENTER.
3W
FP
3 1
46W 2000000 Hz
SET POINT STATUS
REV FWD AUX LEV MODE
This is the field
that will change
from FP to LP.
LLT0
e
Typing LLT0 forces the mode into forward power leveling. The
following example uses FP for the MODE. The front panel will
display the following, assuming a set point of 1000 W and 200 W
reflected is set.
1000W FP 1000W 200W
1000W NORMAL
STATUS SET POINT
REV FWD AUX LEV MODE
LLT1
e
Typing LLT1 forces the mode into load power leveling. The
following example uses LP for the MODE. In this case, load can
mean forward or reverse power. The front panel will display the
following, assuming a set point of 1000 W and 200 W reflected is
set.
1000W LP 1200W 200W
1000W NORMAL
STATUS SET POINT
REV FWD AUX LEV MODE