MKS GMW-25, Руководство по эксплуатации

Страница: 29 / 98

System Installation
GMW-25 2-7
Pin Name Type Description
22
Overheat (C) DO Collector side of isolated transistor switch
for Pin 9.
23 Interlock This pin should connect to Pin 10 to
complete the interlock chain.
If the interlock chain is broken, the AC
contactor will open.
24 Option V User voltage for interface purposes. This
voltage is configurable for
+5 VDC or -15 VDC via a jumper on the
control board. Rated 10 mA max.
25 Load power return
(-)
AO Signal return for Pin 12
DI = Digital Input DO = Digital Output AI = Analog Input AO = Analog Output
Note 1: For all isolated transistor outputs.
Transistor OFF (switch open) - VCEmax = 40 VDC (IC < 500 µA)
Transistor ON (switch closed) - ICmax = 10 mA (VCE < 1 V)
Note 2: For all ground referenced logic level inputs.
HIGH = 2 VDC min. to 30 VDC max.
LOW = -0.2 VDC min. to 1 VDC max.
25-pin Analog I/O Interface Pin Outs (continued)
Table 2.4.1