Mitsubishi L26CPU-BT, Руководство пользователя

Страница: 396 / 450

App - 32 App - 32
APPENDIXES
Availability
( : Available, : Not available)
Online
Number Name Description
Master station Local station
Offline
SW0062
(662
H
)
Module operating
status
Stores the operation setting status of the module.
Station type
0: Master station/local station
1: Standby master station
(Valid only when b1 is 0)
Input status from the data
link faulty station
0: Clear
1: Hold
Master station duplex function
0: Master station duplex function invalid
1: Master station duplex function valid
Number of occupied stations
00: Occupies 1 station
10: Occupies 2 stations
11: Occupies 3 stations
01: Occupies 4 stations
Master station/local station
start by dedicated instruction
0: Start by CPU parameter
1: Start by dedicated instruction
Slave station refresh/compulsory
clear setting in case of programmable
controller CPU STOP
0: Refresh
1: Clears compulsorily
Expanded cyclic setting
00: Single
01: Double
10: Quadruple
11: Octuple
0
b15 b12b11b10 b9
0 0
b8 b7 b6 b5 b4 b3 b2 b1 b0
0 to 0
Block guarantee of cyclic data per station
0: Not set
1: Set
SW0064
(664
H
)
No. of retries
information
Indicates the retry count setting information when there is an error
response.
1 to 7 (times)
SW0065
(665
H
)
No. of automatic
return stations
Indicates the setting information for the number of automatic return
stations during one link scan.
1 to 10 (stations)
SW0066
(666
H
)
Delay timer
information
Indicates the delay time setting information.
SW0067
(667
H
)
Parameter information
Stores the parameter information area to be used.
0
H
: CPU built-in parameters
3
H
: Dedicated instruction (parameter setting with the
G(P).RLPASET instruction and data link startup.)
D
H
: Default parameters (automatically starts CC-Link)
SW0068
(668
H
)
Host parameter status
Stores the parameter setting status.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW0069
(669
H
)
Loading status
3
Stores the duplicate station number status and parameter matching of
each station.
0 : Normal
Other than 0: Stores the error code (refer to Section 15.3). Details
are stored in SW0098 to SW009B and SW009C to
SW009F.
SW006A
(66A
H
)
Switch setting status
Stores the switch setting status.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW006D
(66D
H
)
Max. link scan time Stores the maximum value of the link scan time (in 1 ms units).
SW006E
(66E
H
)
Current link scan time Stores the current value of the link scan time (in 1 ms units).
SW006F
(66F
H
)
Min. link scan time Stores the minimum value of the link scan time (in 1 ms units).
SW0070
(670
H
)
Total number of
stations Stores the final station number set in the parameter.
1 to 64 (stations)
SW0071
(671
H
)
Max. communication
station number
Stores the maximum station number (set number of the station
number setting) that is performing data link.
1 to 64 (stations)
SW0072
(672
H
)
Number of connected
modules
Stores the number of modules that are performing data link.
3: This register checks and stores the status only at link startup.
(To the next page)