Mitsubishi L26CPU-BT, Руководство пользователя

Страница: 393 / 450

App - 29 App - 29
APPENDIXES
Availability
( : Available, : Not available)
Online
Number Name Description
Master station Local station
Offline
SW000A
(60A
H
)
CPU monitoring time
setting
Sets the CPU response monitoring time when the CPU is accessed
with a dedicated instruction.
Default value: 90 (seconds)
Setting range: 0 to 3600 (seconds)
The monitoring time of 3600 seconds will be used if a value outside of
the above setting range is specified.
SW000B
(60B
H
)
Dedicated instruction
retry count setting
Set the number of retries for use of dedicated instructions.
Default value: 0 (No retry)
Setting range: 0 to 7 (times)
When the set value is out of the range, 7 is applied.
SW0014
(614
H
)
SW0015
(615
H
)
SW0016
(616
H
)
SW0017
(617
H
)
Specification of
remote device station
to be initialized.
Specifies the station to be initialized using the information saved in
initialization procedure registration.
0: Initial processing not performed
1: Initial processing performed
b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 1 2
32 31 30 29 27 28 26 25 24 23 22 21 20 19 17 18
47 48 46 44 45 43 42 40 41 39 37 38 36 35 34 33
64 63 62 61 59 60 58 56 57 55 54 52 50 53 51 49
b15
SW0014
SW0015
SW0016
SW0017
Numbers 1 to 64 in the above table indicate the station numbers.
Not necessary to set for the number of occupied stations.
Error invalid stations, reserved stations and any station of the number
higher than the max. are not specified.
1 8
SW0020
(620
H
)
Module status
Indicates the status of communication with a programmable controller
CPU.
0 : Normal
Other than 0: Stores an error code (Error code of programmable
controller CPU).
SW0041
(641
H
)
Data link restart result
Stores the execution result of the data link restart instruction with
SB0000.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW0043
(643
H
)
Refresh instruction at
standby master
switching result
Indicates the execution result of refresh instruction at standby master
switching.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW0045
(645
H
)
Data link stop result
Stores the execution result of the data-link stop instruction with
SB0002.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW0049
(649
H
)
Temporary error
invalid station
specification result
Indicates the execution result of temporary error invalid station
specification.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW004B
(64B
H
)
Temporary error
invalid station
specification cancel
result Indicates the execution result of the temporary error invalid station
specification cancellation.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW004D
(64D
H
)
Loop test result
Indicates the execution result of the loop test.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
SW004F
(64F
H
)
Parameter setting test
result
Indicates the execution result of the parameter setting test.
0 : Normal
Other than 0: Stores an error code (refer to Section 15.3).
1: Can be used for the standby master station only.
8: Parameter setting is required in the case of a standby master station.
(To the next page)