Mitsubishi L26CPU-BT, Руководство пользователя

Страница: 399 / 450

App - 35 App - 35
APPENDIXES
Availability
( : Available, : Not available)
Online
Number Name Description
Master station Local station
Offline
SW0098
(698
H
)
SW0099
(699
H
)
SW009A
(69A
H
)
SW009B
(69B
H
)
Station number
overlap status
6
Stores the overlap status when the first station number of each
module is not overlapped.
0: Normal
1: Overlap station number (first station number only)
16 15 14 13 4 3 2 1
48 47 46 45 36 35 34 33
32 31 30 29 20 19 18 17
64 63 62 61 52 51 50 49
b15 b14 b13 b12 to b3 b2 b1 b0
SW0098
SW0099
SW009A
SW009B
Numbers 1 to 64 in the above table indicate the station numbers.
to
to
to
to
Reserved stations and any station of the number higher than the
max. are excluded.
Unable to detect station number overlapping of standby master
stations.
For the slave stations with "Auto Following" set for transmission
speed, station numbers may not be detected even when any of
them are overlapping.
SW009C
(69C
H
)
SW009D
(69D
H
)
SW009E
(69E
H
)
SW009F
(69F
H
)
Loading/parameter
consistency status
6
Stores the consistency status between the loaded station and the
parameter settings.
A matching error occurs in any of the following cases.
1) Station type mismatch
2) Number of occupied stations mismatch
3) Expanded cyclic setting mismatch
4) CC-Link compatible version mismatch
A matching error will not occur when installation parameter. (For
example, a matching error will not occur when a remote device
station is installed and the parameter setting is an intelligent
device station.)
0: Normal
1: Matching error
Example of matching error
Installation
Remote device station
Intelligent device station
Parameter
Remote I/O station
Remote I/O station
Remote device station
16 15 14 13 4 3 2 1
48 47 46 45 36 35 34 33
32 31 30 29 20 19 18 17
64 63 62 61 52 51 50 49
b15 b14 b13 b12 to b3 b2 b1 b0
SW009C
SW009D
SW009E
SW009F
Numbers 1 to 64 in the above table indicate the station numbers.
to
to
to
to
Reserved stations and any station of the number higher than the
max. are excluded.
6: Only the bit for the first station number is turned on.
The status is checked and stored only at link startup and at parameter update.
(To the next page)