Mitsubishi L26CPU-BT, Руководство пользователя

Страница: 362 / 450

15 - 41 15 - 41
15 TROUBLESHOOTING
(2) Example of check sheet
The following is an example of the check sheet when Microsoft
R
Excel 2000 or
later is installed.
Confirmation Item Contents
Programmable Controller PLC L26CPU-BT
Master Module L26CPU-BT
Programmable Controller PLC 111110000000000A
Master Module 111110000000000A
[3]Module Mount Status I/O Address: 0010H
[4]Other Network Module Other Network Module: None
Mode Setting: [*]Remote Net Mode([*]Ver.1/ [ ]Additional /[ ]Ver.2) / [ ]Remote I/O Net Mode
Scan Mode: [ ]Synchronous/[*]Asynchronous Mode
Module Mode: [ ]I/O mode / [ ]intelligent mode (SW8:A Series Only)
Parameter Setting
Number of PLCs 4Count
Standby Master Station Setting None
PLC Down Drive Specification [*]Stop/[ ]Continue
Reserved Station Station No.3
Error Invalid Station Station No.4
Station Information Written in the system configuration
[7]Parameter Setting
[8]Link Start Method
[9]Link Data Access
[10]Transmission Speed
Linked Station [11]Connected Count
[12]Station Type*
[13]Number of Occupied Stations*
[14]CC-Link Version*
[15]Transmission Speed
[16]Cable Type Cable Model Name:
[17]Transmission Distance Total Extension Distance: m
[18]Inter-Station Distance Distance between Shortest Station: m
[19]Resistance Value
[20]Connected Terminal
System Configuration
Station No., Station Type
Number of Occupied Stations
Length of Cable
[22]
[5]Mode
[6]Parameter Checking the parameter matching status between the specification and PLC
[*]Number of occupied stations of each station(Please check it when you confirm it.)
4Count
[ ]10M/ [ ]5M / [*]2.5M / [ ]625k / [ ]156kbps
[ ]Grounding of FG terminal of each station(Please check it when you confirm it.)
Describe the installation status to "6.System Configuration" when it is not set up in each station.
6.
5.
4.
3.
2.
1.
Grounding
Terminal Resistor
Transmission Cable
*:The details have been described to the system configuration.
Master Station
[ ]Connection between DA-DB of terminal resistor(Please check it when you confirm it.)
[21]FG Terminal
Remote I/O Station:0Count, Remote Device Station:0Count, Intelligent Device Station:4Count
[*]GX WORKS2/ [ ]Dedicated Instruction/ [ ]FROM/TO Instruction
[ ]Startup by Buffer Memory:Y6 / [ ]Startup by E2PROM:Y8 (Only QnA, A, FX Series)
[*]Auto Refresh/ [ ]Dedicated Instruction/ [ ]FROM/TO Instruction
[ ]10M/ [ ]5M / [*]2.5M / [ ]625k / [ ]156kbps
[1]Master Type
[2]Master Version
[*]Ver.1 / [ ]Ver2(Expanded Cyclic Setting:[ ]1Times, [ ]2Times, [ ]4Times, [ ]8Times)
[*]110ohm / [ ]130ohm / [ ]Not Exist