manualshive.com logo in svg

Mitsubishi FX3U Series, Руководство по программированию

Mitsubishi FX3U Series - это надежные и высокопроизводительные программируемые логические контроллеры. Установочное руководство и другие полезные руководства можно бесплатно скачать на manualshive.com. Подробное описание функций и настроек, чтобы обеспечить эффективную работу оборудования.

Поделиться
Скачать
background image

885

Warranty

FX

3U

/FX

3UC

 Series Programmable Controllers

Programming Manual - Basic & Applied Instruction Edition

Warranty

Please confirm the following product warranty details before using this product. 

1. Gratis Warranty Term and Gratis Warranty Range 

If any faults or defects (hereinafter "Failure") found to be
the responsibility of Mitsubishi occurs during use of the
product within the gratis warranty term, the product shall be
repaired at no cost via the sales representative or
Mitsubishi Service Company. However, if repairs are
required onsite at domestic or overseas location, expenses
to send an engineer will be solely at the customer's
discretion. Mitsubishi shall not be held responsible for any
re-commissioning, maintenance, or testing on-site that
involves replacement of the failed module. 

[Gratis Warranty Term] 

The gratis warranty term of the product shall be for one
year after the date of purchase or delivery to a designated
place. Note that after manufacture and shipment from
Mitsubishi, the maximum distribution period shall be six (6)
months, and the longest gratis warranty term after
manufacturing shall be eighteen (18) months. The gratis
warranty term of repair parts shall not exceed the gratis
warranty term before repairs. 

[Gratis Warranty Range] 

1)

The range shall be limited to normal use within the
usage state, usage methods and usage environment,
etc., which follow the conditions and precautions, etc.,
given in the instruction manual, user's manual and
caution labels on the product. 

2)

Even within the gratis warranty term, repairs shall be
charged for in the following cases. 
a) Failure occurring from inappropriate storage or

handling, carelessness or negligence by the user.
Failure caused by the user's hardware or software
design. 

b) Failure caused by unapproved modifications, etc.,

to the product by the user. 

c) When the Mitsubishi product is assembled into a

user's device, Failure that could have been
avoided if functions or structures, judged as
necessary in the legal safety measures the user's
device is subject to or as necessary by industry
standards, had been provided. 

d) Failure that could have been avoided if

consumable parts (battery, backlight, fuse, etc.)
designated in the instruction manual had been
correctly serviced or replaced. 

e) Relay failure or output contact failure caused by

usage beyond the specified Life of contact
(cycles).

f)

Failure caused by external irresistible forces such
as fires or abnormal voltages, and Failure caused
by force majeure such as earthquakes, lightning,
wind and water damage. 

g) Failure caused by reasons unpredictable by

sc ientific  tec hnol ogy  s tanda rds  a t  time  of
shipment from Mitsubishi. 

h) Any other failure found not to be the responsibility

of Mitsubishi or that admitted not to be so by the
user. 

2. Onerous repair term after discontinuation of 

production 

1)

Mitsubishi shall accept onerous product repairs for
seven (7) years after production of the product is
discontinued.
Discontinuation of production shall be notified with
Mitsubishi Technical Bulletins, etc.

2)

Product supply (including repair parts) is not available
after production is discontinued. 

3. Overseas service 

Overseas, repairs shall be accepted by Mitsubishi's local
overseas FA Center. Note that the repair conditions at
each FA Center may differ. 

4. Exclusion of loss in opportunity and secondary 

loss from warranty liability 

Regardless of the gratis warranty term, Mitsubishi shall not
be liable for compensation of damages caused by any
cause found not to be the responsibility of Mitsubishi, loss
in opportunity, lost profits incurred to the user or third
person by Failures of Mitsubishi products, special
damages and secondary damages whether foreseeable or
not , compensation for accidents, and compensation for
damages to products other than Mitsubishi products,
replacement by the user, maintenance of on-site
equipment, start-up test run and other tasks. 

5. Changes in product specifications 

The specifications given in the catalogs, manuals or
technical documents are subject to change without prior
notice. 

6. Product application 

1)

In using the Mitsubishi MELSEC programmable logic
controller, the usage conditions shall be that the
application will not lead to a major accident even if any
problem or fault should occur in the programmable
logic controller device, and that backup and fail-safe
functions are systematically provided outside of the
device for any problem or fault. 

2)

The Mitsubishi programmable logic controller has
been designed and manufactured for applications in
general industries, etc. Thus, applications in which the
public could be affected such as in nuclear power
plants and other power plants operated by respective
power companies, and applications in which a special
quality assurance system is required, such as for
Railway companies or Public service purposes shall
be excluded from the programmable logic controller
applications. 
In addition, applications in which human life or
property that could be greatly affected, such as in
aircraft, medical applications, incineration and fuel
devices, manned transportation, equipment for
recreation and amusement, and safety devices, shall
also be excluded from the programmable logic
controller range of applications. 
However, in certain cases, some applications may be
possible, providing the user consults their local
Mitsubishi representative outlining the special
requirements of the project, and providing that all
parties concerned agree to the special circumstances,
solely at the users discretion. 

Содержание FX3U Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FX3U Series

ABB ACS355 series Quick Start Up Manual preview
ACS355 series
Бренд: ABB Страницы: 139
ABB ACH400 Series Retrofit Manual preview
ACH400 Series
Бренд: ABB Страницы: 28
ABB TZIDC-110 Operating Instructions Manual preview
TZIDC-110
Бренд: ABB Страницы: 59
D-Link DWC-2000 Cli Reference Manual preview
DWC-2000
Бренд: D-Link Страницы: 113
D-Link DWC-1000 Reference Manual preview
DWC-1000
Бренд: D-Link Страницы: 146
ABC Design Tandem Instructions For Use Manual preview
Tandem
Бренд: ABC Design Страницы: 38
easydriver Pro Installation And Instruction Manual preview
Pro
Бренд: easydriver Страницы: 26
Calsense CS3000 Quick Start Manual preview
CS3000
Бренд: Calsense Страницы: 10
ABC Design Rodeo Instructions Manual preview
Rodeo
Бренд: ABC Design Страницы: 10
ABC Design Astro Instruction Manual preview
Astro
Бренд: ABC Design Страницы: 10
Manfrotto 851 Instructions Manual preview
851
Бренд: Manfrotto Страницы: 16
Gardena 4030 Operating Instructions Manual preview
4030
Бренд: Gardena Страницы: 17
SAFI DN15 Manual preview
DN15
Бренд: SAFI Страницы: 18
Badger Meter Orion Series Quick Start Manual preview
Orion Series
Бренд: Badger Meter Страницы: 2
Badger Meter MDS 2000 Installation And Software Manual preview
MDS 2000
Бренд: Badger Meter Страницы: 48
Badger Meter BadgerTouch HREBT Manual preview
BadgerTouch HREBT
Бренд: Badger Meter Страницы: 12
Badger Meter CB-30 User Manual preview
CB-30
Бренд: Badger Meter Страницы: 16
Vanderbilt SPCN310 Installation Instruction preview
SPCN310
Бренд: Vanderbilt Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды