Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 48 / 501

Security alarm system*
Locking and unlocking 3-21
3
Inside alarm (approximately 10 seconds):
The buzzer sounds, warning those inside
the vehicle of an abnormal condition.
Outside alarm (approximately 30 seconds):
The turn-signal lamps blink and the horn
sounds, warning people around the vehi-
cle of an abnormal condition.
Refer to “Alarm activation” on page 3-23.
It is possible to cancel the system activation
during the system preparation mode or the
system armed mode.
In addition, it is possible to cancel the alarm
once it has been activated.
Refer to “Cancelling the system” on page
3-22, “Cancelling the alarm” on page 3-23.
E00301702259
Follow the procedure below to set the system
to the system armed mode.
1. Turn the ignition switch to the “LOCK”
position and then remove the key (vehi-
cles with keyless entry system), or put the
operation mode in OFF (vehicles with
keyless operation system).
2. Exit the vehicle and close all of the doors
and tailgate.
3. Press the LOCK switch (A) on the key of
the keyless entry system or the keyless
operation system, the driver’s or front
passenger’s door lock/unlock switch (B),
or the tailgate LOCK switch (C) in order
to lock all the doors and the tailgate.
Alarm activation
NOTE

The alarm will resume if unlawful actions
are taken again, even if the alarm has
stopped.
System cancellation
NOTE
 When lending the vehicle to another person
or allowing the vehicle to be driven by some-
one who is unfamiliar with the security alarm
system, be sure to give the person a proper
explanation of the security alarm system.
If a person who is unfamiliar with the secu-
rity alarm system accidentally unlocked the
vehicle, causing the alarm to sound, the
alarm would be a nuisance to people nearby.
Setting the system
Driver’s and front passenger’s door lock/unlock
switches
Tailgate LOCK switch
BK0240501EN.book 21 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分