Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 214 / 501

Super select 4WD*
Starting and driving 6-47
6
E00605901356
The shift pattern is shown on the transfer shift
lever knob.
The transfer shift lever should be positioned
in accordance with the following operating
conditions:
 Do not drive your vehicle in the “4HLc” or
“4LLc” on dry paved roads and highways.
Doing so may result in excessive tyre wear,
increased fuel consumption, and possible
noise generation. It may also increase the
differential oil temperature, which may dam-
age the drive system. Further, the drive train
will be subjected to excessive loading,
resulting in oil leakage, component seizure,
or other serious problems. On dry paved
roads and highways, drive the vehicle in
“2H” or “4H” only.
Transfer shift lever operation
CAUTION
: Not push down the transfer
shift lever
: Push down the transfer shift
lever
To shift
from
To Procedure
2H 4H
The transfer shift lever
can be operated while
the vehicle is either
moving or stationary.
When the vehicle is not
in motion, shift the gear-
shift lever to the “N”
(Neutral) position before
operating the transfer
shift lever.
When the vehicle is
moving, and only while
it can be steered straight
ahead, release the accel-
erator pedal before oper-
ating the transfer shift
lever.
4H
2H or
4HLc
4HLc 4H
4HLc 4LLc Stop the vehicle, depress
the clutch pedal to the
floor and operate the
transfer shift lever while
keeping the transfer shift
lever pushed down.
Keep depressing the
clutch pedal while the
2WD/4WD operation
indicator lamp contin-
ues to blink.
4LLc 4HLc
NOTE
 Shifting of the transfer shift lever between
“2H”
↔
“4H” should only be done at speeds
below
62 mph
.
 During driving, never attempt to shift from
“4HLc” to “4LLc”.
 When shifting from “2H” to “4H” in cold
weather while the vehicle is in motion, the
transmission gear may make some noise. In
cold weather, try to shift the gear while the
vehicle is stopped.
To shift
from
To Procedure
BK0240501EN.book 47 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分