Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 437 / 501

Catalytic converter
10-4 Maintenance
10
E01000202538
The exhaust gas scavenging devices used
with the catalytic converter are extremely
efficient for the reduction of noxious gases.
The catalytic converter is installed in the
exhaust system.
It is important to keep the engine properly
tuned to ensure proper catalyst operation and
prevent possible catalyst damage.
E01000304373
1. Pull the release lever towards you to
unlock the bonnet.
2. Raise the bonnet while pressing the safety
lock.
3. Support the bonnet by inserting the sup-
port bar in its slot.
4. Power steering fluid reservoir
5. Engine oil level gauge
6. Engine oil cap
7. Washer fluid reservoir
8. Battery
Catalytic converter
WARNING
 As with any vehicle, do not park or oper-
ate this vehicle in areas where combustible
materials such as dry grass or leaves can
come in contact with a hot exhaust since a
fire could occur.
NOTE
 Use fuel of the type recommended in “Fuel
selection” on page 2-2.
Bonnet
To open
NOTE
 Only open the bonnet when the wipers are in
the parked position. Failure to do so may
cause damage to the bonnet, wiper arms or
front windscreen.
CAUTION
 Note that the support bar may disengage the
bonnet if the open bonnet is lifted by a strong
wind.
 After inserting the support bar into the slot,
make sure the bar supports the bonnet
securely from falling down on to your head
or body.
BK0240501EN.book 4 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分