Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 292 / 501

Sensor system*
Starting and driving 6-125
6
E00615801286
The detection areas can be changed as fol-
lows:
While the operation of the system is stopped
at the “SONAR” switch, press the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds twice to indicate
that the detection area has been changed.
While the operation of the system is stopped
at the “SONAR” switch, press the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds once to indicate
that the detection area has been changed.
E00615901492
In case there is a malfunction in the reversing
sensor system, the display (vehicles equipped
with the color liquid crystal display) for the
malfunctioning sensor will blink and the
warning buzzer will sound for approximately
5 seconds. Even after the buzzer and display
has stopped warning, the indicator lamp (A)
on “SONAR” switch will continue blinking
until the system reverts to the normal state.
Have the vehicle inspected at an authorised
MITSUBISHI MOTORS dealer.
E00647700050
When parking in a garage or during parallel
parking, these sensors alert the driver to any
objects near the vehicle and their distance,
through a buzzer and the sensor display on
the information screen in the multi-informa-
tion display.
Changing the detection areas
Vehicles with a towbar
Vehicles without a towbar
NOTE
 The mode of the detection area can be
switched only when the gearshift lever or the
selector lever is in the “R” (REVERSE) posi-
tion.
 The detection area will not change if you
keep the “SONAR” switch pressed for
10 seconds or more.
 After pressing the “SONAR” switch, revers-
ing sensor system operation differs accord-
ing to the detection area setting.
• Setting when towbar is not equipped
When the gearshift lever or selector lever is
moved to the “R” (REVERSE) position, the
reversing sensor system will operate even if
corner sensor operation was stopped by
pressing the “SONAR” switch.
• Setting when towbar is equipped
When reversing sensor system operation
was stopped by pressing the “SONAR”
switch, the reversing sensor system will not
operate until the engine has been stopped
even if the gearshift lever or selector lever
is moved to the “R” (REVERSE) position.
To resume reversing sensor system opera-
tion, press the “SONAR” switch or stop and
restart the engine, and then move the gear-
shift lever or selector lever to the “R”
(REVERSE) position.
Reversing sensor system warn-
ing display
NOTE
Sensor system
*
BK0240501EN.book 125 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分