Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 156 / 501

Combination headlamps and dipper switch
Instruments and controls 5-59
5
E00532701641
 If the following operation is performed
while the lamp switch is in the “
” posi-
tion, the lamps are automatically turned
off when the driver’s door is opened.
[Except for vehicles equipped with the
keyless operation system]
The ignition switch is turned to the
“LOCK” or “ACC” position, or the key is
removed from the ignition switch.
[For vehicles equipped with the keyless
operation system]
The operation mode is put in OFF or
ACC.
 If the following operation is performed
while the lamp switch is in the “
” posi-
tion, the lamps are automatically turned
off if the driver’s door then remains
closed for approximately 3 minutes.
[Except for vehicles equipped with the
keyless operation system]
The ignition switch is turned to the
“LOCK” or “ACC” position, or the key is
removed from the ignition switch.
[For vehicles equipped with the keyless
operation system]
The operation mode is put in OFF or
ACC.
E00506101761
If the following operation is performed, a
buzzer will sound to remind the driver to turn
off the lamps.
[Except for vehicles equipped with the key-
less operation system]
If the driver’s door is opened when the key is
in the “LOCK” or “ACC” position or
removed from the ignition switch while the
lamps are on.
[For vehicles equipped with the keyless oper-
ation system]
If the driver’s door is opened when the opera-
tion mode is in ACC or OFF while the lamps
are on.
In both cases, the buzzer will automatically
stop if the auto-cutoff function is activated,
the lamp switch is turned off, or the door is
closed.
E00530601356
The daytime running lamps comes on when
the engine is running and the lamp switch is
in the “OFF” or “AUTO” position and the tail
lamps are off.
E00506201733
When the lamp switch is in the “ ” posi-
tion, the beam changes from high to low (or
low to high) each time the lever is pulled
fully (1). While the high-beam is on, the
high-beam indicator lamp in the instrument
cluster will also illuminate.
 If the lamps do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch and we recommend you to
have your vehicle checked.
Lamps (headlamps, fog lamp,
etc.) auto-cutout function
NOTE
NOTE

The lamp auto-cutout will not function when
the lamp switch is in the “
” position.
 The lamp auto-cutout function can also be
disabled.
For further information, please contact your
authorised MITSUBISHI MOTORS dealer.
Lamp monitor buzzer
Daytime running lamp
*
Dipper (High/Low beam
change)
BK0240501EN.book 59 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分