Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 294 / 501

Sensor system*
Starting and driving 6-127
6
For information on how to change the detec-
tion areas, please refer to “Changing the
detection areas” on page 6-128.
E00648100107
To operate the system, the operation mode is
put in ON. When the sensor system is oper-
ated, the sensor system operation indicator
lamp (A) will turn on. To stop the operation,
press the “SONAR” switch; the sensor sys-
tem operation indicator lamp (A) is turned
off.
NOTE
 If the bumper has been exposed to an impact,
the sensors may fail and prevent the system
from functioning properly. Have the vehicle
inspected at an authorised MITSUBISHI
MOTORS dealer.

The sensors do not detect objects located in
the area directly below or near the bumper. If
the height of an object is lower than the
mounted position of the sensors, the sensors
may not continue detecting it even if they
detected it initially.
CAUTION
 The sensor system may not operate properly
under the following conditions:
• The sensors or surroundings have been
wiped by hand.
• The stickers or accessories have been
attached to the sensors or surroundings.
• The sensors or surroundings are covered
with ice, snow, or mud.
• When there is an extremely change in the
outside temperature.
• The sensors are frozen.
• The system receives ultrasonic noise from
other sources (the horns of other vehicles,
motorcycle engines, brakes, radios, pouring
rain, splashing water, snow traction device
(tyre chains), etc.).
• The sensors are extremely hot or cold
(while the vehicle is parked for a long
period of time under a blazing sun or in
cold weather).
• The vehicle tilts significantly.
• The vehicle is driven on a rough road (with
a bumpy, gravel, hilly, or grassy surface).
• The vehicle is too close to an obstacle.
• Immediately after engine starting.
 The sensor system may not properly detect
the following:
• Objects that are thin, such as wire nets or
ropes.
• Objects that absorb sound waves, such as
snow.
• Objects that are shaped with a sharp angle.
• Objects with a smooth surface, such as
glass.
• Objects that are low, such as kerbstones.
CAUTION NOTE
 The buzzer may sound lower than the normal
warning sound when the sensor system is
receiving ultrasonic noise from other
sources, but this is not a malfunction. The
buzzer will stop sounding and the system
will return to normal operation after the
noise is no longer received.
To operate
BK0240501EN.book 127 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分