Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 274 / 501

Forward Collision Mitigation System (FCM)*
Starting and driving 6-107
6
E00635601248
This switch is used to turn on and off the
FCM and also to select your desired collision
alarm timing.
When the switch is held pressed, the ON/OFF
state of the FCM changes from ON to OFF
and vice versa. If you give the switch a short
press with the FCM in the ON state, you can
check the current alarm timing and also
change the collision alarm timing.
 The FCM control and alarm functions may
be triggered in the following situations.
• When there is a structure beside the
entrance of a curve and intersection.
• When running on a narrow iron bridge.
• When passing through a gate with small
head or side clearances.
• When there are metallic objects, steps or
projections on the road surface.
• When quickly approaching a vehicle in
front to overtake it.
• When passing an electronic toll collection
gate.
• When running under an overpass, an pedes-
trian overpass or a tunnel.
• When running in multi-storey car park.
• When running the road the gradient
changes suddenly.
• When stopping very close to a wall or a
vehicle in front.
• When passing close to the vehicle or an
object.
• When driving on the road that the vehicle in
front runs in offset position from your vehi-
cle.
• When the course of the vehicle is over-
grown with weeds.
 Turn off the system beforehand when the
vehicle is placed in any of the following situ-
ations as the system can operate unexpect-
edly.
CAUTION
• When your vehicle’s wheels are driven by
the engine on a lift.
• When your vehicle is towed or your vehicle
tows another vehicle.
• When your vehicle is carried on a truck.
• When making sports driving on a circuit.
• When your vehicle is on a chassis
dynamometer or free rollers.
• When the tyre pressure is not proper.
• When tyre chains are attached.

Improperly handling the system components
may result in such problems as degraded sen-
sor performance and ultimately in an acci-
dent. Be sure to take the following
precautions to keep the system in good oper-
ating conditions.
• Avoid application of strong shock loads to
the sensor and never tamper with or remove
the emblem and the sensor mounting
screws.
• The emblem and the sensor should be kept
clean.
• Do not cover the sensor mounted area of
the vehicle or the emblem on the front
bumper with a sticker or anything such as a
grill guard etc.
• The emblem and the sensor should not be
modified or painted.
• Avoid using different size tyres from those
specified and maintain even tyre wear.
• Do not modify the suspension of your vehi-
cle.
CAUTION
• Never spray or splash water on the emblem
on the front bumper and the sensors.

If the sensor mounted area of the vehicle is
deformed or is applied strong shock loads
due to an accident or some other causes, turn
off the system and please contact an author-
ised MITSUBISHI MOTORS dealer.
NOTE
 A sound will be heard during the activation
of automatic braking, this is a function of the
brake control and is not abnormal.
Forward Collision Mitigation
System (FCM) and Ultrasonic
misacceleration Mitigation Sys-
tem (UMS) (if so equipped)
ON/OFF switch
CAUTION
BK0240501EN.book 107 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分