Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 415 / 501

How to change a tyre
8-8 For emergencies
8
2. With the snap pin (D) pressed, insert han-
dle section (A) into handle section (B)
until it is locked. Insert handle section (C)
into handle section (B) in the same way.
E00801204107
Before changing a tyre, first stop your vehicle
in a safe, flat location.
1. Park the vehicle on level and stable
ground, free of loose pebbles, etc.
2. Set the parking brake firmly.
3. On vehicles with M/T, turn the ignition
switch to the “LOCK” position or put the
operation mode in OFF, and move the
gearshift lever to the “R” (Reverse) posi-
tion.
On vehicles with A/T, move the selector
lever to the “P” (PARK) position and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
4. Turn on the hazard flashers and set up a
warning triangle, flashing signal lamp,
etc., at an adequate distance from the
vehicle, and have all your passengers
leave the vehicle.
5. To prevent the vehicle from rolling when
jacking up the vehicle, place chocks or
blocks (A) at the tyre that is diagonally
opposite from the tyre (B) you are chang-
ing.
6. Get the jack, jack handle and wheel nut
wrench ready.
Refer to “Tools, jack and jack handle” on
page 8-6.
A- Thin handle section (with notch)
B- Thick handle section
C- Thin handle section
How to change a tyre
WARNING
 Be sure to apply chocks or blocks to the
correct tyre when jacking up the vehicle.
If the vehicle moves while jacked up, the
jack could slip out of position, leading to
an accident.
NOTE
 The chocks shown in the illustration do not
come with your vehicle. It is recommended
that you keep ones in the vehicle for use if
needed.
 If chocks are not available, use stones or any
other objects that are large enough to hold
the wheel in position.
BK0240501EN.book 8 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分