Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 193 / 501

Starting and stopping the engine
6-26 Starting and driving
6
On vehicles equipped with A/T, make
sure the selector lever is in the
“P”(PARK) position.
5. Press the engine switch.
The diesel preheat indicator lamp will
first illuminate, and then after a short time
go out, indicating that preheating is com-
pleted. The engine will start.
E00620801369
1. Bring the vehicle to a complete stop.
2. Fully engage the parking brake while
depressing the brake pedal.
3. For vehicles equipped with M/T, turn the
ignition switch to the “LOCK” position to
stop the engine, and then move the gear-
shift lever to the 1st (on a uphill) or “R”
(Reverse) (on a downhill) position.
For vehicles equipped with A/T, place the
selector lever in the “P” (PARK) position,
and stop the engine.
Vehicles
with 5M/T Vehicles
with 6M/T
Vehicles
with 8A/T Vehicles
with 5A/T
NOTE
 If the engine is cold, the diesel preheat indi-
cator lamp is on for a longer time.

Putting the operation mode in ON will also
start preheating the engine. When the engine
has not been started within approximately 5
seconds after the diesel preheat indicator
lamp went out, put the operation mode in
OFF. Then, attempt the engine start proce-
dure to preheat the engine again.
 Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.

When starting the engine, you pressed the
engine switch without depressing the clutch
pedal, warning display will appear (M/T).
Warning display (color liquid crystal dis-
play)
 When starting the engine, the selector lever
is in a position other than the “P” (PARK) or
the “N” (NEUTRAL) position, or you
pressed the engine switch without depressing
the brake pedal, warning display will appear.
(A/T)
Warning display (color liquid crystal dis-
play)
Stopping the engine
Except for vehicles equipped with the
keyless operation system
NOTE
BK0240501EN.book 26 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分