Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 243 / 501

Hill start assist*
6-76 Starting and driving
6
cially when the brakes are wet, to confirm
they work normally.
A film of water can be formed on the brake
discs or brake drums and prevent normal
braking after driving in heavy rain or through
large puddles, or after the vehicle is washed.
If this occurs, dry the brakes out by driving
slowly while lightly depressing the brake
pedal.
It is important to take advantage of the engine
braking by shifting to a lower shift position
while driving on steep downhill roads in
order to prevent the brakes from overheating.
 Avoid hard braking situations.
New brakes need to be broken-in by mod-
erate use for the first
125 miles
.
 The disc brakes are provided with a warn-
ing device which emits a shrieking metal-
lic sound while braking if the brake pads
have reached their wear limit. If you hear
this sound, have the brake pads replaced
immediately by your MITSUBISHI
MOTORS dealer.
E00628001325
The hill start assist makes it easy to start off
on a steep uphill slope by preventing the
vehicle from moving backwards. It keeps the
braking force for approximately 2 seconds
when you move your foot from the brake
pedal to the accelerator pedal.
E00628101414
1. Stop the vehicle completely using the
brake pedal.
2. On vehicles equipped with M/T, place the
gearshift lever into the 1st position.
On vehicles equipped with A/T, place the
selector lever into the “D” (DRIVE) posi-
tion.
When driving downhill
WARNING
 Do not leave any objects near the brake
pedal or let a floor mat slide under it;
doing so could prevent the full pedal
stroke that would be necessary in an
emergency. Make sure that the pedal can
be operated freely at all times. Make sure
the floor mat is securely held in place.
Brake pads
WARNING
 Driving with worn brake pads will make it
harder to stop, and can cause an accident.
Hill start assist
*
CAUTION
 Do not overly rely on the hill start assist to
prevent backwards movement of the vehicle.
Under certain circumstances, even when hill
start assist is activated, the vehicle may
move backwards if the brake pedal is not suf-
ficiently depressed, if the vehicle is heavily
loaded, or if the road is very steep or slip-
pery.
 The hill start assist is not designed to keep
the vehicle stopped in place on uphill slopes
for more than 2 seconds.

When facing uphill, do not rely on using the
hill start assist to maintain a stopped position
as an alternative to depressing the brake
pedal.
Doing so could cause an accident.
 Do not turn the ignition switch to the
“LOCK” or “ACC” position or put the oper-
ation mode in ACC or OFF while the hill
start assist is operating. The hill start assist
could stop operating, which could result in
an accident.
To operate
NOTE
 When reversing on an uphill slope, place the
selector lever or gearshift lever into the “R”
position.
CAUTION
BK0240501EN.book 76 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分