Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 372 / 501

Bluetooth® 2.0 interface*
For pleasant driving 7-63
7
If you are anywhere else within the system,
say “Cancel” to return to the main menu.
E00760400013
The Bluetooth
®
2.0 interface is equipped
with a confirmation function.
With the confirmation function activated, you
are given more opportunities than normal to
confirm a command when making various
settings to the Bluetooth
®
2.0 interface. This
allows you to decrease the possibility that a
setting is accidentally changed.
The confirmation function can be turned on
or off by following the steps below.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Confirmation prompts.”
4. The voice guide will say “Confirmation
prompts are <on/off>. Would you like to
turn confirmation prompts <off/on>.”
Answer “Yes” to change the setting or
answer “No” to keep the current setting.
5. The voice guide will say “Confirmation
prompts are <off/on>” and then the sys-
tem will return to the main menu.
E00760501457
It is possible to use a password as a security
function by setting a password of your choice
for the Bluetooth
®
2.0 interface.
When the security function is turned on, it is
necessary to make a voice input of a 4-digit
password in order to use all functions of the
Bluetooth
®
2.0 interface, except for recep-
tion.
Use the following procedure to turn on the
security function by setting a password.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Password.”
4. The voice guide will say “Password is dis-
abled. Would you like to enable it?”
Answer “Yes.”
Answer “No” to cancel the setting of the
password and return to the main menu.
5. The voice guide will say “Please say a 4-
digit password. Remember this password.
It will be required to use this system.”
Say a 4-digit number which you want to
set as a password.
6. For confirmation purposes, the voice
guide will say “Password <4-digit pass-
word>. Is this correct?” Answer “Yes.”
Answer “No” to return to the password
input in Step 5.
7. When the registration of the password is
completed, the voice guide will say “Pass-
word is enabled” and the system will
return to the main menu.
If a password has been set and the security
function is enabled, the voice guide will say
“Hands-free system is locked. State the pass-
word to continue” when the SPEECH button
is pressed to enter voice recognition mode.
Say the 4-digit password number to enter the
password.
NOTE
 You can return to the previous menu by say-
ing “Go Back.”
Confirmation function setting
Security function (Except for vehi-
cles for Chile and Mexico)
Setting the password
NOTE

Password will be required to access the sys-
tem after the next ignition cycle.
 It is required for a little time after engine
stop that the entered password is actually
recorded in the system.
If the ignition switch or the operation mode
is made to ACC or ON or the engine is
started immediately after engine stop, there
is a case when the entered password is not
recorded in the system. At this time, please
try to enter the password again.
Entering the password
BK0240501EN.book 63 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分