Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 250 / 501

Active Stability & Traction Control (ASTC)*
Starting and driving 6-83
6
E00616901239
The active stability control function is
designed to help the driver maintain control
of the vehicle on slippery roads or during
rapid steering maneuvers. It works by con-
trolling the engine output and the brake on
each wheel.
E00639800078
The active stability control function is auto-
matically activated when the ignition switch
is turned to the “ON” position or the opera-
tion mode is put in ON. You can deactivate
the system by pressing down the “ASC OFF”
switch for 3 seconds or longer.
When the active stability control function is
deactivated, the indicator will turn on. To
reactivate the ASC, momentarily press the
“ASC OFF” switch; the indicator is turned
off.
E00616801111
When extricating the vehicle from mud, sand
or fresh snow with the drive mode-selector in
the “2H”, “4H” or “4HLc” position, you may
find that operation of the ASTC prevents the
engine speed from increasing in response to
depression of the accelerator pedal. If this
happens and the vehicle remains stuck as a
result, place the drive mode-selector in the
“4LLc” position or turn the active stability
control switch OFF. The vehicle will then be
 When the ASTC is activated, you may feel a
vibration in the vehicle body or hear a whin-
ing sound from the engine compartment.
This indicates that the system is operating
normally. It does not indicate a malfunction.

When the anti-lock brake system warning
lamp is illuminated, the ASTC is not active.
 On vehicles with the rear differential lock,
the ASTC and ABS functions are suspended
while the rear differential lock is activated.
ASTC indicator lamp, ASTC OFF indicator
lamp and ABS warning lamp are illuminated
while these functions are suspended. It does
not indicate a problem. When the rear differ-
ential lock is disengaged, these indicator
lamp go out and function again. Refer to
“ABS warning lamp/display” on page 6-80,
“ASTC indicator lamp or ASTC OFF indica-
tor lamp” on page 6-84.
Active Stability Control func-
tion
NOTE NOTE
 Vehicles with super select 4WD II, the active
stability control function does not operate
when the drive mode-selector is in the
“4LLc” position. When the active stability
control function is operating with the drive
mode-selector in the “2H”, “4H” or “4HLc”
position, setting the drive mode-selector to
the “4LLc” position makes the active stabil-
ity control function deactivate automatically.

The active stability control function operates
at speeds of approximately
9 mph
or
higher.
“ASC OFF” switch
CAUTION
 For safety reasons, the “ASC OFF” switch
should only be operated when the vehicle is
stopped.
 Be sure to keep the active stability control
function on while driving in normal circum-
stances.
Driving hints
BK0240501EN.book 83 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分